The range of Davico Heavy Duty Tube and Sheet Terminals have been specifically designed to meet the directives of the most International Standards.

This incorporates the majority of End User demands including the Electrical Authorities, Contractors, Control and Switchboard Panel Builders, Electrical Wholesaling outlets and the Automotive Trades.

For example the design construction of the terminal met the requirements for:-

Copper Specification to 99.9% I.A.C.S	See Note
Copper Finish Electro Tinned to	B.S. 1872 1984 (1990)

The compliance with the electrical specifications are in accordance with the general requirements for initial final resistance and Tensile 'Pull-Off' Tests, and if necessary cycling periods.

The Davico range of Heavy Duty Terminals meets the directives of these subjects, and typical referred standards are as follows:-

Description	B.S. Specification	International or Harmonised
Compression Joints for Copper Connections	See Note	See Note
Codes of Practice for the Installation of Compression Connectors for Power cables	B.S. 7609 1992	See Note
Compression Type Terminal Connectors for Power Cables	See Note	See Note
MOD Specification for Crimped Electrical Connectors	See Note	See Note
Wire Connectors for use with Copper Tube Conductors	See Note	See Note

NOTE; Please contact our technical department for the latest directives & standards for the marked products.
In accordance with their long standing Quality Directives Davico has full registration and a high assessor rating to BS EN ISO Procedures.

	In accordance with E.M.C. and L.V.D. directives our technical declarations and files are available. Packaging and technical data sheets will indicate and endorse CE marking.